Vessels

Petrosmith manufactures vessels for a variety of applications with regard to pressure control and product storage. Our fabrication facilities, which sit on a 35-acre yard, make us capable of building, coating, painting and testing up to 15 vessels per day. We are able to build vessels to client specifications.

Product Listings

Heater Treaters

Standard vertical ASME code or non-code heater treater plus accessories.

Separators

Standard two or three phase 125-500 pounds, low-pressure vertical separators are available.

Vapor Recovery Towers

VAPOR RECOVERY TOWERS

Vapor Recovery Towers are used to extract small amounts of gas that is either trapped in oil or has settled in the top of storage tanks.  VRTs normally operate at a very low pressure and as the gas and oil mixture travels through the vessel the gas particles are extracted and captured either for resale or flare.  Petrosmith can provide our standard design or customize our standard design to match your specific requirements.

STANDARD VAPOR RECOVERY UNIT SIZES
30″ X 30′ (4″ FLANGED INLET/OUTLETS)
36″ X 30′ (6″ FLANGED INLETS/OUTLETS)

Water Knock Outs

Free Water Knock Out’s (FWKO) are used mainly to remove any free water being held in the vessel that can cause problems such as formation of hydrates, corrosion or light emulsions that are difficult to break.  FKWO’s are most commonly three phase because it can separate gas, oil and any free water.

Nominal Oil/Water Capacity ( BBL/Day): From 1610 to 10,035 BBL/Day depending on size and PSI selected.